Specifically designed for easy assembling top and bottom component plastic housings of Rapid test cassette. Minimal
operator interaction is required and the Presser gives stronger attachment.
Operation guide
1 Plug in the power supply (220VAC, 50/60HZ, 3A), turn on the power switch
2 Adjust the speed control knob to a suitable speed
3 Adjust the pressure roller height adjustment knob to the appropriate gap. The gap size can be adjusted flexibly according to the thickness of the board to ensure that the board can be pressed tightly without deformation
4 Put the pre-pressed cassettes on the conveyor belt, and the cassettes can be compressed after passing through the pressure roller.
Operation precautions:
-Avoid overlapping when placing boards
-When the boards pass through the pressure roller, it is best to pass one by one to achieve the best effect
-The top and bottom of the board need to be flat
-Horizontal feeding (in the direction indicated by the arrow)
Specification:
Speed: 0.5-10m/min
plastic housings Gap:1.5-10mm
Belt Width: 250mm
Belt length: 1m
Power:220VAC 50/ 60HZ,3A
Weight: about 30KG
Size: about 1100*600*600mm
中文版 | 
English